Pro Audio XLR Female to RCA Male Cables - Custom Cable Connection

Made from twisted pair audio cable under an aluminum foil for maximum shielding from noise. High flexibility, 6mm PVC jacket reduces the risk of cables kinking and damaging the conductors. Bright nickel plating on solid brass XLR connectors resists wear from reconfiguring and moving equipment from one venue to another.
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors

Assembled in Dallas, TX by Custom Cable Connection

Pinout

Tip : Red

Ring : Blue

Shield : Shield

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

Typical Applications:

Audio connections between multimedia devices.

Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.

Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

Features:

2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire

3.5mm Male Stereo Solder Plug, Nickel plated with strain relief

1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Plug to XLR Female Jack

Rugged Nickel Plated XLR Connectors with Strain Relief

Neutrik NC3MXX and NC3FXX Connectors

Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Neutrik Connectors: NP3RX and NYS228

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Made from twisted pair audio cable under an aluminum foil for maximum shielding from noise. High flexibility, 6mm PVC jacket reduces the risk of cables kinking and damaging the conductors. Bright nickel plating on solid brass XLR connectors resists wear from reconfiguring and moving equipment from one venue to another. Gold plated brass RCA connectors provide maximum signal transfer while eliminating oxidation. Spring strain relief on the RCA plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts.

Features:

• 24AWG Twisted Pair construction
• Foil shield and 60% copper braid
• Neutrik Nickel plated brass XLR connector
• Gold palated brass RCA connector
• Connect tape decks, CD/DVD players to mixing consoles and amplifiers
• Made in the USA

Powered Active Speaker Cable. XLR to XLR Balanced Lead. Male to Female 3 PIN PRO

BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

12 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Male to Blunt Economy Cable

Manual Welding Audio Power Xlr Male To Female Microfone Wire Professional 3.5 Jack Microphone Cable 6.5 Rca Speaker Cable - Audio & Video Cables - AliExpress

Pro Audio Cable - XLR Female to 1/4' Stereo Male Cable

Dual XLR to RCA Cable, Dual XLR Female to Dual RCA Male Cable, 2 XLR Female to 2 RCA Male HiFi Audio Cable, 4N OFC Wire, for Amplifier Mixer Microphone, 10 Feet

Pro Audio Cable - XLR 3 Pin Male to Female Cable

3-Pin XLR Female to Right Angle 1/4 TRS Male Balanced Interconnect Ste – Coluber Cable

Right Angle 1/4 TRS - RCA Male Unbalanced Stereo Cable Custom Length Color Cord

Coluber Custom Cable - Design Your Own – Coluber Cable

4-Pin XLR DMX AES/EBU Data Cables - Male to Female - Custom Cable Connection

WORLDS BEST CABLES 12 Foot - RCA to XLR (Male) Cable Pair - Canare L-4E6S Star-Quad Audio Interconnect Cable & Neutrik-Rean NYS RCA & Neutrik Male XLR Gold Plugs - Custom

XLR Female to 3.5mm Mono Audio Cable - Custom Cable Connection